| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-18.
Oscillation Cylinder (S/N 2001 and above). (Sheet 10 of 10)
TESTING
Only a qualified operator may
perform the next procedure.
All
other personnel must
clear
the
immediate area. Failure to follow
this procedure could result in
SERIOUS INJURY or DEATH. If
injured, obtain medical aid
immediately.
47.
Start engine.
48. Operate oscillation cylinder slowly.
49.
Move oscillation cylinder through at
least five full movements of travel
to bleed air from system.
50.
Check for binding
cylinder operation.
51.
Stop engine.
52.
Inspect hydraulic
in hydraulic
fluid hoses,
fittings and cylinder assemblies for
leaks.
53. Check hydraulic fluid level again.
Add fluid, if necessary, refer to
LO 10-3930-643-12.
NOTE
Return M10A Forklift
equipment condition.
to original
END OF TASK
12-169
|
