| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-18.
Oscillation Cylinder (S/N 2001 andabove).
(Sheet 8 of 10)
ASSEMBLY (cont)
32.
Dip items 12 and 14 thru 24 as an
assembly in clean hydraulic fluid.
33.
Install items 14 thru 24 as an
assembly in barrel (13).
34.
Using a strap wrench, install collar
(12) on barrel (13). Tighten until
snug.
INSTALLATION
35.
Attach hoist and sling to cylinder
assembly (11). Remove slack from
sling.
36.
Position cylinder assembly (11) for
installation.
position hydraulic
fluid ports as
observed during
REMOVAL.
37. Using a large rubber mallet, install
two pins (10).
38.
Using a 3/4"
socket and socket wrench
handle, install two anchors
(9),
washers (8) and bolts (7).
39.
Remove hoist and sling from cylinder
assembly (11).
12-167
|
