| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-17.
Oscillation Cylinder (S/N 2000 and below). (Sheet 4 of 8)
DISASSEMBLY (cont)
12.
13.
14.
15.
16.
17.
18.
19.
Using a 14" adjustable wrench, remove
nut (14).
Remove items 15 thru 19 as an
assembly from rod (21).
Using a scribe, remove and discard
bearing (16), seal (17), two rings
(18) and preformed packing (19) from
piston (15).
Pull rod (21) through parts remaining
on rod (21) to facilitate removal of
retainer bearing (20).
Remove and discard retainer bearing
(20).
Remove and discard preformed packing
(22), ring (23), two seals (24),
wiper ring (25), ring (26) and seal
(27) .
Remove retainer (13).
Using a 5/16" socket and socket
wrench handle, remove two fittings
(28) from pins (10).
Go to sheet 5
12-155
|
