| |
HYDRAULIC SYSTEM TROUBLESHOOTING AND
12-16.
Fork Position Cylinders (S/N
ASSEMBLY (cont)
TM 10-3930-643-3-34
MAINTENANCE. (cont)
2001 and above). (Sheet 8 of 10)
39•
Install items 35 thru 25 as an
assembly in barrel (24).
40.
Using a strap wrench, install collar
(23) on barrel (24).
snug.
INSTALLATION
41.
42.
43.
44.
45.
Tighten
until
Install cylinder assembly (21) in
mounting bracket.
Hydraulic fluid
ports are to be positioned as shown.
Using a plastic mallet, install pin
(22).
Using a 1-1/8" socket and torque
wrench, install nut (20) and tighten
to 90 lb–ft, then back off 1/4 turn.
This is necessary to allow cylinder
end movement between the bracket and
cylinder assembly.
Using a plastic hammer and slip joint
pliers, install pin (19) and new
cotter pin (18).
Install cylinder assembly (16) in
mounting bracket.
Hydraulic fluid
ports are to be positioned as shown.
Go to sheet 9
12-149
|
