| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-16.
Fork Position Cylinders (S/N 2001 and above). (Sheet 6 of 10)
CLEANING/INSPECTION (cont)
25.
Inspect shaft (35) and inside of
barrel (24) for scratches, grooves,
burrs or other damage which could
cause a malfunction. Use fine emery
cloth and oil to remove small burrs
and shallow scratches.
26.
Inspect piston (26), retainer (31),
barrel (24) and shaft (35) and
replace
items
which
cannot be
repaired or have scoring,
scratches
or burrs.
Replace items with damage
which might cause a malfunction; this
may include indentations, flat sides
and such distortions as bent shafts.
Threads on barrel (24) and shaft (35)
must not be damaged.
Be sure
residues of abrasives
and foreign
matter have been cleaned away prior
to assembly.
27.
Inspect all other parts. Refer to
paragraph 2-9.
Go to sheet 7
12-147
|