| |
HYDRAULIC SYSTEM TROUBLESHOOTING AND
12-15.
Fork Position Cylinders (S/N
INSTALLATION
38.
39•
40.
41.
42.
43.
TM 10-3930-643-34
MAINTENANCE. (cont)
2000 and below). (Sheet 8 of 10)
Install cylinder assembly (21) in
mounting bracket.
Hydraulic fluid
ports are to be positioned as shown.
Using a plastic mallet, install pin
(22).
Using a 1-1/8" socket and torque
wrench, install nut (20) and tighten
to 90 lb-ft, then back off 1/4 turn.
This is necessary to allow cylinder
end movement between the bracket and
cylinder assembly.
Using a plastic hammer and slip joint
pliers, install pin (19) and new
cotter pin (18).
Install cylinder assembly (16) in
mounting bracket.
Hydraulic fluid
ports are to be positioned as shown.
Using a plastic hammer, install pin
(17) l
Go to sheet 9
12-139
|
