| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE.
12-15.
Fork Position Cylinders (S/N 2000 and below). (sheet 7 of 10)
CLEANING/INSPECTION
27.
Inspect all other parts.
Refer to
paragraph 2-9.
ASSEMBLY
28.
29.
30.
31
32.
33.
34.
35.
36.
37.
Coat bushing (32), rod (37) and
inside of cylinder shell (24) with
clean hydraulic fluid,
Coat new wiper (36) with clean
hydraulic fluid and using seal
installer, install on rod (37).
Coat new preformed packing (35), new
ring (34) and new preformed packing
(33) with clean hydraulic fluid and
install on bushing (32).
Install bushing (32) on rod (37).
Coat new preformed packing (28), new
nylon rider
(31),
new preformed
packing (30), and new nylon rider
(29) with clean hydraulic fluid and
install on piston half (26).
Coat piston half (27) and piston half
(26) with clean hydraulic fluid.
Install piston half (27) and piston
half (26) with attached parts on rod
(37).
Using a 14 adjustable wrench,
install nut (25).
Install items 37 thru 25 as an
assembly in cylinder shell (24).
Using a strap wrench, install cap
(23) on cylinder shell (24).
Go to sheet 8
12-138
|