| |
HYDRAULIC SYSTEM TROUBLESHOOTING AND
12-15.
Fork Position Cylinders (S/N
REMOVAL
NOTE
1.
2.
3.
4.
5.
6.
7.
8.
TM 10-3930-643-34
MAINTENANCE. (cont)
2000 and below). (Sheet 2 of 10)
Tag all hose and tube assemblies
before disconnecting to aid in
installation.
Using an 11/16" open end wrench,
disconnect tube assemblies (1 and 2)
from tee fitting and elbows (3 and 4)
on vehicle carriage assembly.
Remove elbows (3 and 4) and preformed
packings (5 and 6). Discard
preformed packings (5 and 6).
Disconnect tube assembly (7) from
elbow (8) and flow divider.
Remove elbow (8) and preformed
packing (9). Discard preformed
packing (9).
Disconnect tube assembly (10) from
elbow (11) and from flow divider.
Remove elbow (11) and preformed
packing (12).
Discard
packing (12).
preformed
Using slip joint pliers, remove
cotter pin (13) and pin (14) from
cylinder assembly (16) and mounting
bracket.
Discard cotter pin (13).
Using a 1-1/8 socket and socket
wrench handle, remove nut (15).
Go to sheet 3
12-133
|