| |
TM 10-3930-643-34
HYDRAULIC SYSTEM MAINTENANCE.
12-11.
Lifting Forks and Carriage Assembly.
ASSEMBLY
78.
79.
80.
81.
82.
83.
84.
85.
86.
87.
Using an 11/16” open end wrench,
connect tube assembly (34) to elbow
(45) in vehicles S/N 2000 and below.
Connect tube assembly (34) to elbow
(38).
Connect tube assembly (34) to elbow
(37) in vehicles S/N 2001 and above.
Using a 1-1/8” socket and socket
wrench handle, install clamp
(33),
nut (32), washer (31) and bolt (30)
in vehicles S/N 2001 and above.
Using a 13/16” open end wrench,
install two adapters (29) and nuts
(28).
Using an 11/16” open end wrench,
connect two hose assemblies (27) to
adapters (29).
Attach hoist and slings to forks (26
and 25).
Using hoists and slings and a rubber
mallet, install forks (26 and 25) and
two pins (24).
Remove hoist and slings.
Using a 3/4” socket and socket wrench
handle, install two plates (23),
washers (22) and four bolts (21).
(Sheet 14 of 15)
Go to sheet 15
12-99
|
