| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-11.
Lifting Forks and Carriage Assembly. (Sheet 13 of 15)
ASSEMBLY (cont)
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
Position items 60 thru 52 as an
assembly on frame (82).
Using hoist and sling, position items
60 thru 52 as an assembly on frame
(82).
Using a 2-9/16” socket and socket
wrench handle, install two pins (51),
cam followers (50) and two nuts (49).
Remove hoist and sling.
Using a 3/8” socket and socket wrench
handle, install lubrication fittings
(48 and 47).
Using a 13/16” open end wrench,
install three elbows (45) on
flow
divider (46).
Using a 7/16” socket and 1/4” socket
head screw key, install items 46 and
45 as an assembly, two bolts
(44),
washers (43) and nuts (42).
Position tee (41).
Using an 11/16” open end wrench,
connect hose assemblies (40 and
39)
in vehicles S/N 2001 and above.
Install elbow (38).
Using a 13/16” open end wrench,
install elbow (37) and nuts (36 and
35) in vehicles S/N 2001 and above.
Go to sheet 14
12-98
|
