TM  10-3930-643-34 HYDRAULIC  SYSTEM  TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 12-11. Lifting Forks and Carriage Assembly. (Sheet 1 of 15) This task covers: a. Removal b. Disassembly c.   Cleaning/Inspection   d.   Assembly e. Installation INITIAL  SETUP Tools Tool  Kit,   General   Mechanic’s Automotive NSN 5180-00-177-7033 Shop  Equipment,  Automotive Maintenance  and  Repair: Field  Maintenance,  Basic, Less  Power NSN 4910-00-754-0705 Shop  Equipment,  Automotive Maintenance  and  Repair: Field   Maintenance NSN 4910-00-919-0076 1-1/2”  Open  end  wrench NSN 5120-00-184-8489 Two  hoist  and  slings,  capacity of 4600 lbs. 2-9/16”  socket  and  socket Materials/Parts Cleaning  solvent  P-D-680 (App. C, Item 5) Detergent (App. C, Item 33) Clean cloth (App. C, Item 24) Small tag (App. C, Item 28) Preformed packing (16) 3/4 inch flat washer (7) Tie strap (6) Wooden block (2) Torques Except for special torques shown, all fasteners are tightened to a standard  torque. Refer to Appendix E. wrench  handle NSN  5189-00-177-7033 EQUIPMENT  CONDITION References Paragraph 12-13 or 12-14 Condition   Description Sideshift  cylinder  removed. Paragraph  12-8 Fork control valve removed. Paragraph  12-15  or  12-16 Fork  position  cylinders  removed. Paragraph 12-17 or 12–18 Oscillation  cylinder  removed. Go to sheet 2 12-86