| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-9.
Tilt Cylinder. (Sheet 10 of 10)
TESTING
69.
70.
71.
72.
73.
74.
75.
Using a 1-1/8” socket and socket
wrench handle, disconnect rod end of
cylinder from vehicle.
Start engine and move tilt control
lever to tilt forward position until
rod is fully retracted.
Using a 9/16” open end wrench,
disconnect rear hose from cylinder.
and cap hose.
Operate engine at 2625 to 2750 rpm
and q ove tilt control lever to
tilt
forward position.
Observe rear port.
Continuous fluid
flow from port indicates defective
packing or deformed cylinder.
Connect rear hose.
Using a 1-1/8” socket and socket
wrench handle, connect rod end to
vehicle.
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
12-74
|