| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE.
12-8.
Fork Control Valve. (Sheet 8 of 9)
ASSEMBLY
41.
Using a 3/8”
open end wrench, install
nut (36).
42.
Connect three wire assemblies (35) to
wire assemblies (34).
43.
Using a 7/8”
open end wrench, install
three sleeves (33) and nuts (32).
INSTALLATION
44.
Using a 1/2” socket, socket wrench
handle and a box and open end wrench,
install two brackets (31) and four
nuts (30) to front of vehicle.
45.
Install fork control valve assembly
(29), four washers (28), nuts (27)
and bolts (26).
46.
Using a 7/8”
open end wrench, install
new preformed packing (25) and
connector (24).
47.
Connect hose assembly (23).
Go to sheet 9
12-63
|
