| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-8. Fork Control Valve. (Sheet 7 of 9)
CLEANING/INSPECTION (cont)
31.
Wipe hose assemblies (5, 8, 11, 14,
17, 20 and 23) and boot (39) with
clean cloth moistened with detergent.
Dry with compressed air.
32.
Clean all other parts with cleaning
solvent P-D-680.
Dry thoroughly with
compressed air. Refer to paragraph
2-8.
33.
Inspect all parts. Refer to para-
graph 2-9.
ASSEMBLY
34.
Position three valves (47).
35.
Using a 1/2” socket and socket wrench
handle, install three studs (46), two
washers (45) and nuts (44).
36.
Using a 7/8” open end wrench, install
two new preformed packings (43) and
plugs (42).
37.
Install six shims (41) and three
coils (40).
38.
Install boot (39).
39.
Install connector assembly (38).
40.
Position three wire assemblies (37).
Go to sheet 8
12-62
|
