TM  10-3930-643-34 HYDRAULIC  SYSTEM  TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 12-8. Fork Control Valve. (Sheet 5 of 9) DISASSEMBLY  (cont) 23. Disconnect  three  wire  assemblies  (37) at terminals. 24. Remove  connector  assembly  (38). 25. Remove boot (39). 26. Remove three coils (40) and six shims (41). 27. Using a 7/8” open end wrench, remove two plugs (42) and preformed packings (43). Discard  preformed  packings (43). 28. Using a 1/2”   socket  and  socket  wrench handle, remove two nuts (44), washers    (45) and three studs (46). 29. Separate three   valves (47). Go to sheet 6 12-60