| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE.
12-8. Fork Control Valve. (Sheet 4 of 9)
REMOVAL
16.
Using a 7/8” open end wrench,
disconnect hose assembly (23) at
connector (24).
17.
Remove connector (24) and preformed
packing (25).
Discard preformed
packing (25).
18.
Using a 1/2” socket, socket wrench
handle and a 1/2” box and open end
wrench, remove four bolts (26) , nuts
(27), washers (28) and fork control
valve assembly (29).
19.
Remove four nuts (30) and two
brackets (31).
DISASSEMBLY
20.
21.
22.
Using a 7/8” open end wrench, remove
three nuts (32) and sleeves (33).
Disconnect three wire assemblies
(34) from wire assemblies (35)
lifting up connector assembly (38)
for access.
Using a 3/8” open end wrench, remove
nut (36) pulling back boot (39) for
access.
Go to sheet 5
12-59
|
