TM  10-3930-643-34 HYDRAULIC  SYSTEM  TROUBLESHOOTING  AND  MAINTENANCE. 12-8. Fork Control Valve. (Sheet 2 of 9) REMOVAL 1. 2. 3. 4. 5. 6. NOTE All wire must be tagged  when removed from connector. Indicate whether wire is connected to pin-type   or socket-type connector. Using slip joint pliers, disconnect cable assembly (1) at connector from front of vehicle. Using a 1/2”   socket and socket wrench handle,   remove bolt (2) and washer (3). Disconnect wire assembly (4). NOTE Tag all hose and tube assemblies before disconnecting to aid  in installation. Using a 7/8” open end wrench, disconnect  hose assembly (5) at connector  (6). Remove connector (6) and preformed packing (7). Discard preformed packing (7). Disconnect hose assembly (8) a elbow (9). Go to sheet 3 12-57