| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE.
12-6.
Tilt Valve Assembly. (Sheet 8 of 8)
ASSEMBLY
42.
Using a 1-1/4” socket and torque
wrench, install items 23 thru 15 as
an assembly in housing (25).
43.
Install two seals (14) and new wipers
(13).
44.
Position seat (11), spring (10) and
seat (9) on spool (12).
45.
Using a flat tip screwdriver, install
screw (8).
Tighten screw (8) to 4
lb-ft .
46.
Install items 14 thru 8 as an
assembly.
47.
Using a 1/4” socket head screw key and
torque wrench, install plate (7), cap
(6) and two bolts (5).
Tighten bolts
(5) to 5 lb-ft.
48.
Using a flat tip screwdriver, install
plate (4) and two screws (3).
49.
Install poppet (2) and spring (l).
50.
Adjust relief valve items 43 thru 26
as an assembly, refer to paragraph
12-3.
NOTE
Return M10A Forklift to
original equipment condition.
END OF TASK
12-49
|
