| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cent)
12-6.
Tilt Valve Assembly. (Sheet 7 of 8)
ASSEMBLY (cont)
32.
Using a 1-1/4” socket and socket
wrench handle, install items 36 thru
31 as an assembly in body (37).
33.
Using an 11/16” socket, socket wrench
handle and flat tip screwdriver,
install adjusting screw (30), new
preformed packing (29) and nut (28).
34.
Using an 11/16” socket and torque
wrench, install new preformed packing
((27) and nut (26). Tighten nut (26)
to 10 lb-ft.
35.
Install new preformed packing (24) in
housing (25).
36.
Using a 1-1/4” socket and torque
wrench, install relief valve items 43
thru 26 as an assembly.
Tighten nut
(26) to 75 lb-ft.
37.
Install new preformed packing (22) on
poppet (23).
38.
Install ring (20) and new preformed
packing (19) on spacer (21).
39.
Install items 21 thru 19 as an
assembly and nut (18) in poppet (23).
40.
Using a 7/8” socket and socket wrench
handle, install spring (17) and items
23 thru 18 as an assembly in plug
(17).
41.
Install new preformed packing (16) in
plug (15).
Go to sheet 8
12-48
|
