| |
TN 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE.
12-6.
Tilt Valve Assembly. (Sheet 4 of 8)
DISASSEMBLY
16.
17.
18.
19.
20.
21.
22.
23.
Using an 11/16” socket and socket
wrench handle, remove nut (26) and
preformed packing (27). Discard
preformed packing (27).
Using an 11/16” open end wrench and
a flat tip screwdriver, remove nut
(28), preformed packing (29) and
adjusting screw (30).
Discard
preformed packing (29).
Using a 1-1/4” socket, socket wrench
handle and vise, remove items 31 thru
36 as an assembly from body (37).
Using a scribe, remove and discard
preformed packing (31).
Remove spring (32), poppet (33),
preformed packing (34) and ring (35)
from plug (36).
Discard preformed
packing (34).
Remove items 38 thru 43 as an
assembly from body (37).
Remove spring (38), piston (39) and
items 41 thru 43 as an assembly from
poppet (49).
Remove ring (41) and preformed packing
(42) from poppet (43). Discard
preformed packing (42).
Go to sheet 5
12-45
|
