| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE.
12-3.
Loader Control Valve. (Sheet 3 of 14)
REMOVAL
6.
Using a 1-1/2" open end wrench,
disconnect hose assemblies (18 thru
20) .
7.
Using a 3/4”
socket, socket wrench
handle and a open end wrench, remove
three bolts (21), washers (22), nuts
(23), washers (24) and items 25 thru
36 as an assembly from vehicle.
8.
9.
10.
11.
Using a 1-3/8"
open end wrench,
remove three connectors (25) and
preformed packings (26). Discard
three preformed packings (26).
Using a 1“ open end wrench,
remove
elbow (27), preformed packing
(28),
connector (29) and preformed Packing
(30).
Discard preformed packings (28
and 30).
Using a 1-9/16” open end wrench,
remove two elbows (31 and 32) and
preformed packings (33). Discard two
preformed packings (33).
Using a 10”
adjustable wrench, remove
elbow (34) and preformed packing (35)
from loader control valve (36).
Discard preformed packing (35).
Go to sheet 4
15
12-
|
