| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE. (cont)
12-2.
Hydraulic Pump. (Sheet 4 of 4)
INSTALLATION
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Using snap ring pliers, install new
seal (17), snap ring (16) and new
seal (15) in hydraulic pump (18).
Install new preformed packing (14).
Using a 3/4” socket and torque
wrench, install items 18 thru 14 as
an assembly, two lock washers
(13)
and bolts (12). Tighten two bolts
(12) to 55 lb-ft.
Using an 11/16” adjustable wrench,
install new preformed packing
(11)
and tee assembly (10) to hydraulic
pump (18).
Using a 5/8” open end wrench, connect
hose assembly (9) to tee assembly
(10).
Position new preformed packing (8)
and hose assembly (7).
Using a 9/16” socket and socket
wrench handle, install
two flange
halves (6) and four bolts (5).
Position new preformed packing (4)
and hose assembly (3).
Install two flange halves
(2) and
four bolts (1).
Fill hydraulic reservoir to proper
level, refer to LO 10-3930-643-12.
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
12-12
|
