| |
TM 10-3930-643-34
BODY, CHASSIS AND HULL ACCESSORY ITEMS.
11-1.
Heater Assembly (S/N 2001 and above). (Sheet 6 of 6)
ASSEMBLY
25.
26.
27.
28.
29.
30.
31.
32.
Using a flat tip screwdriver, install
resistor (18), clamp (17) and screw
(16) to heater (14).
Install plate (13) and two screws (12)
in heater (14).
Install two cups (11) in plate (10).
Install plate (10), two screws
(9)
and plate (8) in heater (14).
Using a 1/2” socket and socket wrench
handle, install switch (7) and nut
(6).
Connect four wire assemblies (4) to
connector (5) and switch (7).
Using a flat tip screwdriver, install
knob (3).
Using a 5/16” socket and socket
wrench handle, install cover (2) and
four screws (1).
NOTE
Return M10A Forklift
equipment condition.
to original
END OF TASK
11-7/(11-8 blank)
|
