| |
TM 10-3930-643-34
BODY, CHASSIS AND HULL
11-1.
Heater Assembly
ASSEMBLY (cont)
18.
19.
20.
21.
22.
ACCESSORY ITEMS .(cont)
(S/N 2001 and above). (Sheet 5 of 6)
Using a 1/2” socket and socket wrench
handle, install grommet (31) and two
nuts (30) in heater (14).
Install spacer (28), plate (27) and
two nuts (26) on motor (29).
Using a flat tip screwdriver, install
fan (25) and screw (24).
Using a 1/2” socket and socket wrench
handle, install items 29 thru 24 as
an assembly and three nuts (23) in
heater (14).
Using a flat tip screwdriver, install
valve (21), two-hoses (20) and four
clamps (19) in two cores (22).
23.
Install items 22 thru 19 as an
assembly in heater (14).
24.
Install two cups (15) in plate (13).
Go to sheet 6
11-6
|
