| |
TM 10-3930-643-34
BODY, CHASSIS AND HULL ACCESSORY ITEMS. (cont)
11-1.
Heater Assembly (S/N 2001 and above). (Sheet 3 of 6)
DISASSEMBLY (cont)
11.
Using a flat tip screwdriver, loosen
four clamps (19), remove two hoses
(20), clamps (19) and valve (21) from
two cores (22).
12.
Using a 1/2" socket and socket wrench
handle, remove three nuts (23) and
items 24 thru 29 as an assembly from
heater (14).
13.
Using a flat tip screwdriver, remove
screw (24) and fan (25) from motor
(29).
14.
Using a 1/2" socket and socket wrench
handle, remove two nuts (26), plate
(27) and spacer (28).
15.
Remove two nuts (30) and grommet (31)
from heater (14).
Go to sheet 4
11-4
|
