| |
TM 10-3930-643-34
FRAME AND TOWING ATTACHMENTS MAINTENANCE.
10-4.
Roll Over Protective Structure. (S/N 2000 and below). (Sheet 5 of 6)
ASSEMBLY
19.
Using a 9/16" socket and socket
wrench handle, install plate (27) and
two screws (26) on front, right side,
inside of cab.
20.
Install new channels (25 thru 22) in
right side of cab.
Apply adhesive
backing of channels (25 thru 22) to
clean, dry surface.
21.
Install panel (21),
eight
washers
(20) and bolts (19).
22.
Install seal (18) on
right
side
window frame in cab.
23.
Using a 7/16" socket and socket
wrench handle, install two bars (17),
six washers (16), bolts (15) and nuts
(14) in rear, upper left and right
sides of cab.
24.
Install seal (13) on window frame in
rear center window in cab.
25.
Install protector (12) in seal (13).
26.
Press seal (13) in tab "A" into tab
“B”.
A mild soap solution on tab "A"
will help
to make
installation
easier.
27.
Install seal (11) on protector (12).
Go to sheet 6
10-27
|
