| |
TM 10-3930-643-34
FRAME AND TOWING ATTACHMENTS MAINTENANCE. (cont)
10-4.
Roll over protective Structure.
(S/N 200 and below). (Sheet 2 of 6)
DISASSEMBLY (cont)
4.
5.
6.
7.
8.
9.
10.
11.
12.
NOTE
The following steps cover removal
of items from
the rear left
window. Removal of these items
from the right rear is identical.
Using a putty knife, remove seal (8)
from inner lip of protector (9) from
left rear window of cab.
Locate break in seal and pry tab “A”
free of tab “B” in seal (10).
Remove protector (9) from seal (10).
Remove seal (10) from window frame.
Remove seal (11) from protector (12)
from rear center window of cab.
Locate break in seal (13) and pry tab
"A" free of tab “B”.
Remove protector (12) from seal (13).
Remove seal (13) from window frame.
Using a 7/16" box and open end
wrench, remove six nuts (14) from
upper left and right sides of inside,
rear of cab.
Go to sheet 3
10-24
|
