| |
TM 10-3930-643-34
FRAME AND TOWING ATTACHMENTS MAINTENANCE.
10-2.
Frame Hinge Pin and Frame Assembly. (Sheet 6 of 13)
ADJUSTMENT
29.
30.
31.
32.
33.
Using a flat brass
remove spacer (16)
Install shims (17)
punch and hammer,
from shaft (15).
and spacer (16)
on shaft (15).
inch thick.
Lubricate shaft
grease, using a
hammer, install
Using a 3-1/16"
Each shim is 0.010
(15) with clean
flat punch and
shaft (15).
socket and socket
wrench handle, install nut (4) and
adjust, refer to Adjustment pro-
cedures.
Using a 15/16" socket and socket
wrench handle, install retainer plate
(3), two washers (2) and bolts (1).
REMOVAL
34.
Remove transmission to bearing hanger
propeller shaft, refer to
TM
10-3930-643-20.
35.
Remove steering linkage, refer to TM
10-3930-643-20.
36.
Use four ten-ton bottle jacks to
support front and rear frames.
Go to sheet 7
10-11
|