| |
TM 10-3930-643-34
FRAME AND TOWING ATTACHMENTS MAINTENANCE.
10-1.
Bolster. (Sheet 4 of 4)
INSTALLATION
9.
10,
11.
12.
13.
14.
15.
16.
Lubricate bushings (7) with clean
grease. Using a-flat brass punch and
hammer, install bushings
(7) in
bolster (6).
Groove in bushing (7)
must be in alinement with bore in
bolster (6).
Using dollies, position bolster (6)
under vehicle.
Attach slings to bolster (6).
Using a hoist and sling, position
bolster (6) to frame.
Lubricate spacers (5) and four new
preformed packings (4) with clean
grease and install on bolster (6).
Lubricate two pins (3) with clean
grease and using a flat brass punch
and hammer, install.
Measure clearance between spacers (5)
and frame. Clearance must be 0.0625
inch.
Remove pins (3) and add
spacers as necessary if clearance
exceeds requirements.
Using a 3/4" socket and socket wrench
handle, install two washers (2) and
bolts (1).
NOTE
Return M10A Forklift to original
equipment condition.
END OF TASK
10-5
|
