| |
TM 10-3930-643-34
STEERING TROUBLESHOOTING AND MAINTENANCE.
9-6.
Control Valve and Check Valve. (Sheet 13 of 15)
INSTALLATION
83.
Using a 1-1/8" open end wrench,
install new preformed packing (24)
and elbow (23).
84.
Using a 1-1/4" open end wrench,
tighten locknut on elbow (23).
85.
Using a 1" open end wrench,
connect hose assembly (22).
86.
Using a 9/16" socket and socket
wrench handle, install new preformed
packing (21), hose assembly (20), two
flange halves (19) and four bolts
(18).
87.
Using a 3/4" open end wrench,
install new preformed packing (17)
and connector (16).
88.
Using a
connect
89.
Install
90.
Using a
handle,
(12) on
compartment.
9/16" open end wrench,
hose assembly (15).
new tie strap (14).
1/2" socket and socket wrench
install strap (13) and bolt
right
front of engine
91.
Position check valve (11) on valve
assembly (42) under right
side of
cab.
92.
Position new preformed packing
(10)
and hose assembly (9) on check valve
(11).
93.
using a 9/16" socket and socket
wrench handle, install
two flange
halves (8) and four bolts (7).
94.
Install new preformed packing (6).
Go to sheet 14
9-49
|
