| |
TM 10-3930-643-34
STEERING TROUBLESHOOTING AND MAINTENANCE.
9-6.
Control Valve and Check Valve. (Sheet
ASSEMBLY
NOTE
All moving parts, preformed packings,
plungers and seal counterbores in
valve must be lubricated before
assembling.
52.
53.
54.
55.
56.
57.
58.
59.
60.
Install plunger (95), shims (94) and
spring (93) in valve (96).
Install new preformed packing
(92),
retainer (91), new preformed packing
(90) and plug (89).
Using an 11/16" socket, socket wrench
handle and torque wrench, install
poppet (88), spring (87), adjusting
screw (86), new preformed packing
(85) and locknut (84).
Tighten
locknut
Install
and nut
lb-ft .
Install
(80).
Install
Install
Install
(84) to 10 lb-ft.
new preformed packing
(83)
(82).
Tighten nut (82) to 10
new seal (81) and new
wiper
plunger (79).
poppet (78) and spring (77).
new preformed packing (75)
and retainer (74) on plug (76).
Using a flat tip
bit in adapter
socket and torque
wrench,
install
items 76 thru 74 as an
assembly.
Tighten plug (76) to 7.5 lb-ft.
9 of 15)
Go to sheet 10
9-45
|
