| |
TM 10-3930-643-34
STEERING TROUBLESHOOTING AND MAINTENANCE. (cont)
9-6.
Control Valve and Check Valve. (Sheet
DISASSEMBLY (cont)
35.
36.
37.
38.
39.
40.
41.
Remove washer (51), preformed packing
(52) and rings (53 and 54) from plug
(55).
Discard
preformed packing
(52).
Using a 9/16" socket and socket
wrench handle, remove two bolts (56),
cap (57), body (58) and seal (59).
Discard seal (59).
Using a flat tip screwdriver, remove
two screws (60), plate (61),
wiper
(62) and seal (63). Discard wiper
(62) and seal (63).
Remove screw (64), preformed packing
(65), seat (66), spring (67) and seat
(68).
Discard
preformed packing
(65).
NOTE
Same quantity and size of shims
must be installed during assembly.
Using a scribe, remove plate (69) and
shims (70).
Remove spacer (71), spring (72) and
poppet (73).
Remove items 74 thru 76 as an
assembly.
6 of 15)
Go to sheet 7
9-42
|
