| |
TM 10-3930-643-34
STEERING TROUBLESHOOTING AND MAINTENANCE. (cont)
9-6.
Control Valve and Check Valve. (Sheet 4 of 15)
REMOVAL (cont)
18.
Using a 15/16" open end wrench,
disconnect hose assembly (25).
19.
Using a 1-1/8" open end wrench,
remove connector (26) and preformed
packing (27).
Discard preformed
packing (27).
20.
Using a 15/16" open end wrench,
disconnect hose assembly (28).
21.
Using a 1-1/4" open end wrench,
loosen locknut on elbow (29).
22.
Using a 1-1/8" open end wrench,
remove elbow (29) and preformed
packing (30).
Discard preformed
packing (30).
23.
Using a 15/16" socket, socket wrench
handle and a 1-1/8" open end wrench,
remove nut (31), washer (32) and
bolt (33).
24.
Move pin (34) aside.
25.
Using a 1-1/8" open end wrench,
loosen locknut (35).
26.
Using a 10" adjustable wrench, remove
link assembly (36). Unscrew from
plunger on valve assembly (42).
27.
Remove washer (37).
Go to sheet 5
9-40
|
