TM  10-3930-643-34 STEERING  TROUBLESHOOTING  AND  MAINTENANCE. 9-2. Steering Gear Assembly. (Sheet 8 of 8) ASSEMBLY 39. Using a 9/16” socket and socket wrench  handle,  install  three  washers (10) and bolts (9). Tighten bolts (9) to 30 lb-ft. 40. Using a wooden dowel and hammer, install  ring  (7),  bearing (6) and seat (5) in adjuster (8). 41. Using a spanner wrench, install items 8 thru 5 as an assembly and locknut (4). Tighten  locknut (4)  to  90 lb-ft. 42. Using a 3/4”   socket and socket wrench handle, install nut (3). Tighten  nut (3) to 22 lb-ft. 43. Using a 9/16” open-end wrench, install flange (2) and bolt (1). Use matchmarks made before step 1. NOTE Return  M10A  Forklift  to original equipment  condition. END OF TASK 9-13