| |
TM 10-3930-643-34
BRAKE TROUBLESHOOTING AND MAINTENANCE.
8-14.
Air Compressor. (Sheet 2 of 13)
DISASSEMBLY
1.
Using a 7/16”
socket and socket wrench
handle, remove two bolts (1), valve
(2) and two cups (3) from cylinder
head (5).
2.
Using snap ring pliers, remove two
cages (7), springs (8), washers (9),
valves (10) and seats (11) from valve
(2).
3.
Using a drift punch and hammer,
matchmark cylinder head (5) and
cylinder block (15) with punch in
crankcase (41).
4.
Using a 1/2” socket and socket
wrench handle, remove five bolts (4),
cylinder head (5) and gasket (6).
Discard gasket (6).
5.
Using a gasket scraper, scrape carbon
accumulations from under cylinder
head (5).
6.
Using a small flat tip screwdriver,
pry off two guards (12) and valves
(13) on cylinder head (5).
GO to sheet 3
8-63
|
