| |
TM 10-3930-643-34
BRAKE TROUBLESHOOTING AND MAINTENANCE. (cont)
8-8.
Pressure Converter Reservoir (S/N 2001
REMOVAL
l
l
10
2.
3.
4.
5.
6.
7*
8.
NOTE
The following is a maintenance
procedure for
the left pressure
converter reservoir.
The maintenance
procedure for the right pressure
converter reservoir is identical.
Tag all hose and tube assemblies
before disconnecting to aid in
installation.
Using a 7/8” open end wrench, loosen
tube assembly (1) at elbow (11) on
left side of front frame.
Position suitable container at end of
tube assembly (l).
Using a 7/8” open end wrench,
disconnect tube assembly (1) from
pressure converter.
Using a 3/4” open end wrench, remove
breather (2).
Drain pressure converter.
Using a 7/8” open end wrench, remove
tube assembly (l).
Using a 5/8” open end wrench, remove
connectors (3 and 4).
Disconnect items 5 thru 9 as an
assembly from connector (10).
and above). (Sheet 2 of 6)
Go to sheet 3
8-32
|
