| |
TM 10-3930-643-34
BRAKE TROUBLESHOOTING AND MAINTENANCE. (cont)
8-4.
Service Brake Assembly. (Sheet 6 of 6)
INSTALLATION
36.
Using a 9/16” socket and socket
wrench handle, install new preformed
packing (11) and plug (10) in two
caps (18).
37.
Position disc (9) on axle planetary
hub .
38.
Using a 1-1/8” socket and torque
wrench, install 18 washers (8) and
bolts (7).
Tighten 18 bolts (7) to
285 lb-ft.
39•
Install axle planetary hub, refer to
paragraph 7-5.
40•
Position items 24 thru 10 as an
assembly on disc (9).
41.
Using a 3/4” socket and socket wrench
handle, install ten washers (6) and
bolts (5).
Tighten ten bolts (5) to
290 lb-ft.
42.
Position washer (4) and tee pipe (3).
43.
Using a 3/4” socket and torque
wrench, install washer (2) and bolt
(l).
Tighten bolt (1) to 7 lb-ft.
44.
Using a 10” adjustable wrench,
connect tube assembly (25) to tee
pipe (3).
45. Install tire and wheel assembly,
refer to TM 10-3930-643-20.
46.
Bleed air in brake hydraulic system,
refer to TM 10-3930-643-20.
NOTE
Return M1OA Forklift to original
equipment condition.
END OF TASK
8-16
|
