TM  10-3930-643-34 GENERAL  MAINTENANCE  PROCEDURES.  (cont) 2-13. Electrical  Repairs.  (cont) (2) Connector with ring-type terminals. DISASSEMBLY Cut wire close to terminal. Remove  and  discard  terminal. ASSEMBLY NOTE New terminal must be selected to match the ring size of the terminal with the mounting screw at the connection. New terminal must also match crimp tabs with the thickness of the wire. 1. 2. 3. 4. 5. Strip wire, refer to Wire Size Chart. Do not nick or cut strands. Tin bare wires. Use resin-core solder to coat bare wires. If using solid core solder, clean wires with flux before tinning. Insert wire into new terminal. Crimp new terminal. Securely fasten wire to new crimp-type, insulated new terminal. Secure wire to prevent movement and solder new solder-type terminal. Use solder sparingly. 2-18