| |
TM 10-3930-643-34
BRAKE TROUBLESHOOTING AND MAINTENANCE.
8-3.
Parking Brake Air Cylinder. (Sheet
DISASSEMBLY
10
2.
3.
4.
5.
6.
7.
8.
Spring is under pressure from
plate. Use suitable press to
release spring.
Failure to
follow this procedure could
result in SEVERE INJURY.
If you
are injured, seek
medical
aid
immediately.
Position air cylinder (1) securely in
press.
2 of 5)
Using a 1/2” socket and socket wrench
handle, remove eight screws (2).
Release press slowly to relieve
pressure on spring (3).
Remove air cylinder (l).
Remove spring (3) and plate (4).
Using a flat tip screwdriver, remove
four screws (5) and plate (6).
Using a 7/8” open end wrench, remove
nuts (7 and 8).
Remove shaft (9).
Go to sheet 3
8-7
|
