TM  10-3930-643-34 FRONT  AND  REAR  AXLES  TROUBLESHOOTING  AND  MAINTENANCE. 7-7. Rear Axle Assembly (S/N 2000 and below). (Sheet 7 of 7) INSTALLATION 27. Using a 1-1/2” open end wrench, 1-1/2” socket, socket wrench handle and torque wrench, install eight washers (21), bolts (20), washers (19) and nuts (18). Tighten eight nuts (18) to 680 lb-ft. 28. Using a 1-1/2” adjustable wrench, install clamp (17), washer (16) and bolt (15)0 29. Using a 1-1/8” socket and socket wrench  handle,  connect  tube assem- blies (24). 30• Using a 9/16”   open end wrench, 9/16” socket and socket wrench handle, install  clamp  (13),  bolt  (12),  washer (11) and nut (10). 31• Install clamp (9), bolt (8), washer (7) and nut (6). 32. Using a 7/16” open end wrench, 7/16” socket  and  socket wrench handle, install  washer  (5),  bolt  (4),  washer (3) and nut (2). 33. Using 1-1/2” open end tube assembly (l). NOTE wrench,  connect Return M10A Forklift to original equipment  condition. END OF  TASK 7-45