| |
TM 10-3930-643-34
FRONT AND REAR AXLES TROUBLESHOOTING AND MAINTENANCE. (cont)
7-7.
Rear Axle Assembly (S/N 2000 and below). (Sheet 4 of 7)
REMOVAL (cont)
12.
13.
14.
15.
16.
Using a 1-1/8”
1-1/4” socket
handle, remove
open
end
wrench,
and
socket wrench
16 nuts (23), washers
(24), bolts (25), washers (26),
spindle (27) and preformed packing
(28) from bowl (45).
Discard
preformed packing (28).
Using a 1-1/4” open end wrench,
remove plug
(29) and preformed
packing (30) from spindle.
Discard
preformed packing (30).
Using a 1-1/8” open end wrench,
1-1/8”socket and socket wrench
handle, remove 16 nuts (31), washers
(32), bolts (33), washers (34),
spindle (35) and preformed
packing
(36) from bowl (45).
Discard
preformed packing (36).
Using a 1-1/4” open end wrench,
remove plug
(37) and preformed
packing (38)
from spindle (35).
Discard preformed packing (38).
Remove plug (39), preformed packing
(40), plug (41), preformed packing
(42), plug (43) and preformed packing
(44) from bowl (45).
Discard
preformed packings (40, 42 and 44).
GO to sheet 5
7-42
|
