| |
TM 10-3930-643-34
FRONT AND REAR AXLES TROUBLESHOOTING AND MAINTENANCE. (cont)
7-7.
Rear Axle Assembly (S/N 2000 and below). (Sheet 2 of 7)
REMOVAL
NOTE
Vehicle must be raised off the
ground and supported with jack
stands under the frame for the
following procedure.
1.
Using a
1/2”
open
end
wrench,
disconnect tube assembly (1) from
under rear of vehicle.
2.
Using a 7/16” open end wrench, 7/16”
socket and socket wrench handle,
remove nut (2), washer (3), bolt (4)
and washer (5).
3.
Using a 9/16” open end wrench, 9/16”
socket and socket
wrench handle,
remove nut (6), washer (7), bolt (8)
and clamp (9) from left side of axle
assembly.
4.
Remove nut (10), washer (11),
bolt
(12) and clamp (13) from right side
of axle assembly.
Go to sheet 3
7-40
|
