TM  10-3930-643-34 FRONT  AND  REAR  AXLES  TROUBLESHOOTING  AND  MAINTENANCE. 7-6. Rear Drive Axle (S/N 2001 and above). (Sheet 2 of 7) REMOVAL NOTE Vehicle must be raised off the ground and supported with jack stands under the frame for the following  procedure. 1. Using a 1/2” box and open end wrench, disconnect, tube assembly (1) from under rear of vehicle. 2. Using a 7/16”   socket,  socket wrench handle and a 7/16” open end wrench, remove nut (2), washer (3), bolt (4) and washer (5). 3. Remove nut (6), washer (7), bolt (8), washer (9) and clamp (10) from left side of rear axle assembly. 4. Using a 9/16” socket and socket wrench handle, remove two bolts (11), washers (12) and access cover (13). Go to sheet 3 7-33