TM  10-3930-643-34 FRONT AND REAR AXLES 7-5. Front and Rear REMOVAL  (cont) TROUBLESHOOTING  AND  MAINTENANCE.  (cont) Planetary. (Sheet 3 of 8) 4. 5. 6. 7. 8. 9. Remove hoist and sling. Remove axle shaft (7). Using a 9/16” socket and socket wrench  handle,  remove  12  bolts  (8), retainer (9), shims (10 and 11) and items 12 thru 16 as an assembly. Discard shims (10 and 11). NOTE Weight of ring and hub assembly is approximately  60  lbs. Using  a  1/2”  socket  and  socket  wrench handle,  remove  eight  bolts  (12), four bars (13) and ring (14) from hub (15). Using  an  arbor  press  and  bearing adapter,  remove  bearing  (16). Using a ball peen hammer and a flat tip screwdriver,   remove items 17 thru 27 as an assembly from left side of rear axle assembly. Go to sheet 4 7-26