| |
TM 10-3930-643-34
FRONT AND REAR AXLES TROUBLESHOOTING AND MAINTENANCE. (cont)
7-3.
Front Axle Assembly (S/N 2000 and below and S/N 2904 and above). (Sheet 8
of 9)
INSTALLATION (cont)
25.
26.
27.
28.
29.
30•
Using a 1-1/4” socket and socket
wrench handle, install new preformed
packing (32) and plug (31) in spindle
(29).
Using a 1-1/8”
handle, 1–1/8”
torque wrench,
packing (30),
socket, socket wrench
open end wrench
and
install new preformed
spindle
(29), 16
washers (28), bolts (27), washers
(26) and nuts (25) in bowl (47).
Tighten nuts (25) to 270 to 300
lb-ft.
Using a 9/16” socket, socket
wrench
handle and transmission and differ-
ential lift,
install differential
(24), refer to paragraph 7-4.
Install two shafts (23).
Using a transmission and differential
lift, position axle under front of
vehicle
to install front axle
assembly items 47 through 23 as an
assembly.
Using a 1-1/2” socket, socket wrench
handle,
1-1/2” open end wrench and
torque wrench, install eight washers
(22), bolts (21), washers (20) and
nuts (19).
Tighten nuts (19) to 680
lb-ft.
Go to sheet 9
7-18
|
