| |
TM 10-3930-643-34
FRONT AND REAR AXLES TROUBLESHOOTING AND MAINTENANCE. (cont)
7-3.
Front Axle Assembly (S/N 2000 and below and S/N 2904 and above). (Sheet 4
of 9)
REMOVAL (cont)
10.
Using a transmission and differential
lift, remove axle items 23 thru 47 as
an assembly.
11.
Place front axle assembly on wood
blocks and remove transmission and
differential lift.
12.
Remove two shafts (23).
13.
14.
Using a 3/4” socket, socket
wrench
handle and transmission and differ-
ential lift,
remove differential
(24), refer to paragraph 7-4.
Using a 1-1/8” socket, socket wrench
handle and a 1-1/8” open end wrench,
remove 16 nuts (25), washers (26),
bolts (27), washers (28), spindle
(29) and preformed packing (30) from
bowl (47) on right side.
Discard
preformed packing (30).
Using a 1-1/4” socket and socket
wrench handle, remove plug (31) and
preformed packing (32) from spindle
(29).
Discard preformed packing
(32).
15.
Go to sheet 5
7-14
|
