TM  10-3930-643-34 FRONT  AND  REAR  AXLES  TROUBLESHOOTING  AND  MAINTENANCE. 7-3. Front Axle Assembly (S/N 2000 and below and S/N 2904 and above). of 9) REMOVAL NOTE Tag all hose and tube assemblies before disconnecting to aid in installation. 5. Using 7/16” and 13/16” box and open end  wrenches,  remove  tube  assemblies (14). 6. Using a 3/4”   socket and socket wrench handle, remove bolt (15), washer (16) and clamp (17). 7. Disconnect  propeller  shaft  (18),  refer to TM 10-3930-643-20. Use  transmission  and  differential lift for removal and installation. Keep area clear of unnecessary personnel. Failure to follow this procedure could result in SEVERE INJURY . 8. Position transmission and differ- (Sheet 3 ential lift under front of vehicle to remove axle items 23 thru 47 as an assembly. 9. Using a 1-1/2”   socket,  socket  wrench handle and a 1-1/2” open end wrench, remove eight nuts (19), washers (20), bolts (21) and washers (22). Go to sheet 4 7-13