| |
TM 10-3930-643-34
FRONT AND REAR AXLES TROUBLESHOOTING AND MAINTENANCE. (cont)
7-3.
Front Axle Assembly (S/N 2000 and below and S/N 2904 and above). (Sheet 2
of 9)
REMOVAL
Vehicle must be raised off the
ground and supported with jack
stands under the frame
for the
following procedure.
1.
Using 7/16” and 1/2” open end
wrenches, disconnect tube
assembly
(1) from front, underside of vehicle.
2.
Using a 7/16” socket, socket wrench
handle and a 7/16” open end wrench,
remove nut (2), washer (3), bolt (4)
and washer (5).
3.
Using a 9/16” socket, socket wrench
handle and a 9/16” open end wrench,
remove nut (6), washer (7), bolt (8)
and clamp (9) from right side of axle
assembly.
4.
Remove nut (10), washer (11), bolt
(12) and clamp (13) from left side of
axle assembly.
Go to sheet 3
7-12
|
