TM  10-3930-643-34 FRONT  AND  REAR  AXLES  TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 7-2. Front Axle Assembly (S/N 2001 to 2903). (Sheet 6 of 6) INSTALLATION  (cont) 24. Using a 9/16” socket and socket wrench  handle,  and install access cover (22), two washers (21) and bolts (20). 25. Using a 9/16” socket, socket wrench handle and a 9/16” open end wrench, install clamp (19), washer (18), bolt (17), washer (16) and nut (15). 26. Using a 9/16” socket and socket wrench handle,   install access cover (14), two washers (13) and bolts (12). 27. Using a 9/16” socket,  socket wrench handle and a 9/16” open end wrench, install clamp (11), washer (10), bolt (9), washer (8) and nut (7). 28. Using a 7/16” socket, socket wrench handle and a 7/16” open end wrench, install  washer  (6),  bolt  (5),  washer (4) and nut (3). 29. Using 3/4” and 13/16” box and open end  wrenches,  connect  tube assembly (2). 30. Using  a  1/2”  socket,  socket  wrench handle and a 1/2” open end wrench, connect  propeller  shaft  (l),  refer to TM 10-3930-643-20. NOTE Return M10A Forklift to original equipment  condition. END OF TASK 7-10