| |
TM 10-3930-643-34
TRANSMISSION TROUBLESHOOTING AND MAINTENANCE.
6-9.
Transmission Oil Cooler. (Sheet 4 of
INSTALLATION
10.
Using two 3/4" open end wrenches,
install two clamps (18), bolts (17),
washers (16) and nuts (15) on oil
cooler assembly (13), if removed.
11.
Using a 1/2" socket and socket wrench
handle, install four washers (14),
oil cooler assembly (13) or oil
cooler (12), four washers (11)
and
nuts (10).
12.
Using a flat tip screwdriver, connect
hose assembly (9).
13.
Install hose (8), clamp (7), tube (6)
and clamp (5).
14.
Using a 1-1/2" open end wrench,
connect hose assemblies (4 and 3).
15.
Using a flat tip screwdriver, connect
hose assemblies (2 and 1).
NOTE
Return M1OA Forklift to original
equipment condition.
4)
END OF TASK
6-61/(6-62 blank)
|
